Within a week or so after the iPhone released, hackers have got a serial console working.
Here is how they did:
The serial has the same pinouts as iPod serial use a 6.8kish resistor from pin 21 to gnd,
tie pin 11-sergnd to the real ground use iphoneinterface to send the following commands in recovery mode:
setenv debug-uarts 1
saveenv
reboot
that should work!
The shell is basic, features a TFTP client – means – lots of attempts in coming weeks are expected from few more hackers/people.
here is command list
source: hackintosh
Related posts:
No Comments so far ↓
There are no comments yet...Kick things off by filling out the form below.